The Rio system, developed by executives at Foxconn, Intel, PC Matic, and InFocus transforms an ordinary WiFi router into a fortified security hub, aptly dubbed the “Fort Knox” of WiFi routers. This transformation addresses a significant vulnerability in personal internet security: the simple fact that traditional routers are protected by only a password, which has become an inadequate defense against cyber threats.

Designer: Rio Router

Click Here to Buy Now: $299 $549 ($250 off). Hurry, only 9/355 left! Less than 72 hours left.

Rio advances beyond basic security measures by incorporating features that control device access on a granular level. It only allows devices that have been pre-approved by the user to connect to the network. Any unapproved device attempting to connect is isolated in a holding area until explicitly allowed by the user via the Rio app. This proactive monitoring and approval system mimics the security checks of a VIP club bouncer, ensuring that only verified devices gain entry and interact within the network.

The company states that “Rio creates a secret code that hides and protects everything about your gadgets when they’re online. It scrambles up their names, where they are, and what they’re saying, so nobody can snoop on your online life.”
This indicates that advanced encryption is used to enhance the privacy and security of communications across your network by obscuring details about connected devices. This encryption safeguards device identities, physical locations, and communication data, ensuring that even if hackers intercept this information, they cannot understand or utilize it without the necessary decryption key, which is securely held by the Rio system and its legitimate users. This process is crucial for preventing potential eavesdroppers from accessing sensitive data, thereby protecting your network even if it is compromised and ensuring that privacy and security are maintained at all times. Given that a startling 80% of consumers have reportedly had personal information leaked onto the dark web, such encryption is beneficial and essential for safeguarding personal data against cyber threats.

This system adopts a method similar to a digital fortress. Using SecureRoom technology segments the network into up to 16 distinct compartments. Each compartment is isolated, preventing a compromised device from affecting the entire network.

Additionally, the Rio system is equipped with smart DNS and web filtering capabilities that proactively prevent access to suspicious or harmful websites, enhancing overall online safety. The Rio app facilitates real-time alerts and management, giving users complete control over their network from anywhere in the world.

Moreover, Rio addresses common household concerns about internet safety with built-in features that filter out unsafe web content and block potential phishing sites, creating a safer browsing environment for all family members. Its sleek design and easy setup mean that Rio protects and integrates seamlessly into your home or office environment.

Rio’s guest mode feature improves home WiFi security by providing visitors with a separate access point, making sure the main network stays protected. Whether hosting family gatherings, client meetings in home offices, community events, or children’s playdates, Rio connects each guest to the internet through a special “guest room.” This setup protects your primary network and offers guests convenient and temporary WiFi access. Once they leave, Rio automatically revokes their access, and if they need to reconnect, they must ask permission, effectively acting like a security guard for your WiFi. This seamless integration of guest access into your home network provides both protection and ease, accommodating a variety of hosting scenarios without compromising your network’s integrity.

Rio’s intuitive interface in its mobile app enhances the user experience by simplifying network management. Users can effortlessly adjust settings, monitor network activity, and switch geographic locations without the complexity of traditional VPN configurations. This feature is particularly valuable for users who enjoy international content or travel frequently, as it provides continuous access to home services. Also, Rio allows users to watch shows and movies from anywhere in the world without needing to set up a VPN on each device. Just connect to Rio, and instantly, your internet presence is invisible, assuring that your smart gadgets like Alexa, thermostats, baby monitors, cameras, and doorbells remain hidden from prying eyes, keeping your internet life private and safe.

Click Here to Buy Now: $299 $549 ($250 off). Hurry, only 9/355 left! Less than 72 hours left.

The post Upgrade Your WiFi with Unmatched Privacy and Safe Connectivity at Home or Anywhere in the World first appeared on Yanko Design.

There are things that we need to have with us everywhere we go, depending of course on your personality. In fact, there’s a term for that – EDC or everyday carry. These are things like watches, pens, lighters, notebooks, utility knives, etc. But the past few years, they’re really more of our digital tools – smartphones, tablets, laptops, earphones. There are also those that have to carry fidget toys around with them to help relieve anxiety or boredom. What if you get a combination of a device that can also become a fidget toy for your restless fingers?

Designer: Eric Cheng

This concept for an earbuds case may be that combination you’re looking for. The EDC 1.0 Lucky Push is a concept case for the D-Mooster truly wireless earbuds that uses “card pushing” mechanism to open and close it. The motion of the sliding up and down and snapping is supposedly addictive enough that you would want to do it repetitively, even if you’re not using your earbuds at the moment. Hence, it becomes a fidget toy as well if you need to keep your hands busy.

There are three designs for the EDC 1.0 Lucky Push: Big Monster, Become Wealthy, and Become Happy. For the superstitious, doing the repetitive motion will let you accumulate luck and wealth, or at least that’s what the designer thinks it will bring you. I understand with the last two designs as we all want to be wealthier and happier, but I wonder what the Big Monster concept will bring you, other than a cute fidget toy with monsters engraved on it.

Earbuds cases are usually really more functional as you use it to store your earbuds or charge them once they run out of juice. So this is an interesting idea to make the case itself a bigger part of your EDC pack as it becomes a fidget toy as well. If the designs are also interchangeable, it will make it even more interesting.

The post Earbuds case doubles as fidget toy for your anxious fingers first appeared on Yanko Design.

It’s the year 2024 and if you’re still manually rotating your screwdrivers, you’re doing something wrong. Meet the SES Nano, a ridiculously compact electric screwdriver that’s no larger than a pencil and weighs a paltry 2 ounces or 58 grams. Arrowmax, the folks behind the SES Nano, has practically perfected the art of electric screwdrivers, and the SES NANO builds on the backs of all that research and development. This tiny screwdriver packs 5 torque settings, peaking at 5 kgf.cm that’s powerful enough to work with even the tightest screws. A simple two-button interface lets you easily choose whether you want to rotate the screwdriver clockwise or counter-clockwise, letting you tighten or loosen screws without any elbow grease. Just load one of the SES NANO’s 52 bits, hold the driver in place, press the button, and watch the magic happen. The SES NANO’s tiny design makes it a no-brainer against most conventional electric drivers that are much larger, and is perfect for your workshop or DIY kit whether you’re working with watches or phones, laptops, computers, drones, tiny models, or even your spectacles.

Designer: Arrowmax

Click Here to Buy Now: $59 $89 (34% off) Hurry! Only 6 days left.

Despite its compact size and measuring just over 5 inches in length and weighing a mere 58 grams, the SES NANO boasts an impressive torque output of up to 5.0 kgf.cm at 250 RPM. This translates to tackling various projects, from repairing delicate electronics like smartphones and glasses with precision control to confidently assembling flat-pack furniture. The lightweight design, crafted from a single piece of high-grade CNC aluminum alloy, ensures durability while making it easy to maneuver and reducing fatigue during use. Simple one-button operation with clear forward and reverse controls ensures user-friendliness for anyone, regardless of DIY experience.

The SES NANO goes beyond just being small and convenient. With its ingenious design that integrates a robust output circuit board, a precision gearbox, and a secure bit-locking mechanism seamlessly into a single unit, it prioritizes both efficiency and precision. This innovative design minimizes the overall volume of the power unit while maximizing its effectiveness. An LED display keeps you informed about critical details like the current battery level (displayed as a percentage), the selected torque mode (out of 5 available modes), and charging status. Strategically placed 4 LED lights on the chuck illuminate the work area, providing a shadowless light source for focused operation, especially in tight or poorly lit environments.

The SES NANO comes with a comprehensive set of 59 S2 steel screwdriver bits, including commonly used Phillips, star, and nut driver heads, all featuring a standard 4mm hex shank for secure fitment within the driver. This wide variety of bits ensures you’re equipped to handle most screw types you might encounter during various DIY tasks. The inclusion of a handy 58mm extension tip further enhances the SES NANO’s versatility, allowing you to reach and tackle screws in tight spaces or deep recesses that may otherwise be inaccessible with a standard screwdriver. The universal Type-C charging port, a common connector found in most modern devices, ensures convenient and hassle-free power top-ups using a power bank, laptop, or any USB-C wall charger. The best part, you can access the SES Nano’s charging port right through the case, allowing you to juice your screwdriver without even taking it out!

Each SES NANO ships with its all-encompassing case that contains the driver itself along with 52 well-arranged driver bits to choose from, ranging from common to specialty bits. The case also contains an extender tool that lets you extend the reach of your SES NANO to access hard-to-reach spots or sunken screws, a magnetizer that helps you re-magnetize bits, and finally a USB-C charging cable for your device. The SES NANO starts at a discounted $59, and ships globally starting June 2024.

Click Here to Buy Now: $59 $89 (34% off) Hurry! Only 6 days left.

The post This $59 Electric Screwdriver is the size of a pencil but packs 52 bits and a powerful battery first appeared on Yanko Design.

There’s a massive missing link between tech companies and tech reviewers… and instead of fixing it, we’re playing the blame game.

The backlash following bad reviews from MKBHD and other tech outlets like The Verge, Engadget, and CNET has been swift from the AI community. The internet is ablaze, either blaming Marques Brownlee for being too harshly critical in his review of the Humane AI Pin and the Rabbit R1 device… or shaming Humane and Rabbit for not delivering on what they promised. The blame, however, lies on the inherent relationship between the two parties. Like two people who aren’t emotionally ready to date, these AI companies shouldn’t have even shipped their products to tech reviewers.

The job of a tech reviewer, as its name rather simply suggests, is to provide an objective (or sometimes even a subjective) analysis of a product for their consumers/viewers. Tech Reviewers highlight technology through the lens of ‘Is this worth the money or not’… The problem, however, is that Humane and Rabbit needed beta testers, not tech reviewers.

Who’s to blame?

Let’s look at every single stakeholder in this AI charade and you’ll see that there’s some blame to go around for everyone. The first reaction, and justifiably so, is to blame Humane and Rabbit. They overpromised, underdelivered, hyped the product, raked in tonnes of VC and preorder money, but couldn’t stick the landing. Companies all across the world have been rushing to develop the ‘next iPhone’, and while Samsung has hedged all its bets on folding devices, and Apple on a $3400 headset, Humane and Rabbit happened to be at the right place at the right time with the right buzzwords. Imagine this, an AI assistant powerful enough to do anything you ask – it’s literally something out of a sci-fi movie, and that’s precisely what these companies hoped we’d think. They weren’t wrong. However, they committed the cardinal sin of the entrepreneur – they pitched something that didn’t exist. Sure, this wasn’t as detrimental as the stunts Elizabeth Holmes or Sam Bankman-Fried pulled, but in essence, it was still a far-fetched lie or rather a very convenient truth. An AI that does everything you ask doesn’t exist and probably won’t for a while… but a cute design or a body-mounted projector was more than enough to deceive us… and for the sake of this argument, let’s operate under the good-faith assumption that Humane and Rabbit didn’t know they were pushing a bad product.

Why the hardware trickery though? Why did Humane and Rabbit NEED to build hardware devices that looked fancy/quirky/cool? Here’s where the blame shifts to the powers that be – Google, Apple, Microsoft, Amazon, and Meta. For every reviewer that said the Humane AI Pin or Rabbit R1 “could’ve been a smartphone app”, there are thousands of engineers at these companies building JUST THAT. It’s no coincidence that Humane and Rabbit BOTH had their products publicly reviewed well before Google I/O and Apple’s WWDC. Rumor has it that Apple and Google are just waiting to launch AI assistants with similar features, tying into all the smartphone-related services. These large companies have repositories of consumer data, and they have a powerful influence, putting them miles ahead of the starting line when it comes to the AI race. The only way Humane and Rabbit could escape the clutches of these companies was to isolate themselves completely from them. Not to mention, there’s absolutely no way Apple would allow a third-party smartphone app to have Humane or Rabbit’s level of control over your entire device. Sure, Humane and Rabbit could have made all-powerful AI assistant apps, but they A. wouldn’t be as impressive or attractive, and B. they’d be doomed to fail because of the goliath forces that are Apple and Google.

A snippet of the Twitter outrage following MKBHD’s review. Ironically, Sam Sheffer (new media head for Humane) admits the software is bad, while the product sells for $700

A venture capitalist’s job, in Shark Tank parlance, is to “pour gasoline on a fire”, so there’s definitely some blame to share here too. AI became a buzzword in the second half of 2022 and it’s been on the top of everyone’s mind ever since. I don’t blame VCs for seeing potential in the ideas that Humane and Rabbit came up with, but if there’s one thing that absolutely pisses me off, it’s the fact that they took the criticism of Humane and Rabbit’s devices a little too personally. After all, a VC thrives on value creation – take that away and you have a very angry person who’s poured millions into a project that now doesn’t have anywhere to go. However, bad products and bad companies are all too common in the VC world. What they didn’t expect, however, was their golden goose (AI) to lay a rotten egg.

It’s easy to say that tech reviewers were simply doing their job and deserve no blame (after all, I’m a tech reviewer too), but the truth is that the reviewers also share a bit of blame in this entire cycle of events. However, not for the reason you think. Arguably, Marques Brownlee deserves praise for being forthright with his review – some reviewers would probably hesitate to say something bad about a company if there was sponsorship money involved – and although MKBHD didn’t have any financial stake in this product, they spoke their mind (as did every other reviewer). But that isn’t where the problem lies. The problem lies with the hype train that tech reviewers both create and ride. These reviewers are, by nature of their profession, enthusiasts when it comes to technology – so it’s no surprise that they were the biggest cheerleaders of Humane and Rabbit 5-6 months back when the products were first teased. If anything, the media should have balanced their enthusiasm with a pinch of real-world salt. Had that been the case, these disastrous reviews would’ve stung less under the pretext of the age-old “I told you so”…

Dave2D’s review of the Rabbit R1 device may just be the most sensible, erudite take on the internet.

So what’s the solution?

If the last few years have proven anything, it’s that designers and companies operate in such secrecy, they often don’t put themselves in the shoes of the consumer to begin with. With Tesla pushing the steering yoke over a wheel even though consumers have been begging for the latter, with Apple needing EU regulators to force them into adopting USB-C, with Google cancelling products left right and center against the wishes of their consumers, or firing employees who object to their technology being used for warfare (whoops, I went there), there’s a massive disconnect between what companies do and what consumers want. Even though at a smaller scale, Humane and Rabbit seem to find themselves in a similar soup. Whether it’s the holier-than-thou attitude that’s hard-coded into being an entrepreneur, or whether it’s a bunch of VCs deciding what’s good for the public, the one voice that seems to constantly be left out of the room is that of consumers… and their only representative for now is the humble tech reviewer, who actually is incentivized to see things from their points of view. Sadly, that also means Marques Brownlee ends up being in the line of fire when he has to call an AI gadget ‘the worst product he’s ever reviewed’…

The solution lies in reimagining how products are developed and promoted. Humane and Rabbit needed beta testers, not reviewers, who would’ve helped them swallow the hard pill that is the realization that their product isn’t ready for the real world. After all, it’s better to hear that bitter truth behind closed doors instead of an influencer saying it on YouTube… right?

The post Humane AI Pin and Rabbit R1 versus Tech Reviewers: Who’s to blame? first appeared on Yanko Design.

Of the many disorders that afflict people today, diabetes is perhaps the literally most painful one to monitor and maintain. Even with advancements in medical technology, pricking your finger is still the most accurate way to measure blood sugar levels. At the same time, taking in insulin often involves painful and tedious injections. And it isn’t just humans who are hurting from these, but the environment also suffers from all the waste these life-saving tools produce. It’s probably high time to have a glucose monitor and insulin delivery system that is not only painless and convenient but also sustainable, which is exactly what this minimalist-looking device concept is proposing.

Designer: Maxwell Stevens

CGMs or Continuous Glucose Monitors are one of the less invasive methods of keeping tabs on your blood sugar levels, though most do require inserting a sensor under the skin that is read by a device that sticks to your body over that site. When it comes to injecting insulin, on the other hand, insulin pumps remove the need to always pierce your skin for every injection, as a needle stays in its position for a day or two before needing to be replaced, unless the pump is one that actually stays on your body and above your skin. If these two devices sound almost related, it’s because they really are, and the Ingo CGM and insulin pump concept actually combines these two functions into a single, reusable, and sustainable device.

This oval-shaped device combines two critical functions in a single compact design that diabetes patients can discreetly wear on their bodies. Ingo can even have different colors to match skin tones so they won’t stand out as much as more obvious medical devices. There’s also the element of convenience as the device can be easily recharged on a wireless base, while the CGM sensor and pump needle are integrated into the sensor patches that stick over your skin.

Ingo also differs from existing CGMs and insulin pumps in the way that it tries to reduce the amount of waste as much as possible. Instead of disposable parts, it uses reusable components and recyclable patches, lessening the burden on the environment that these solutions often place on the planet. The rechargeable device and refillable insulin tank also prolong the life of the product or at least those parts that shouldn’t have to be thrown away frequently. Ingo is definitely an interesting proposal for a more humane and more environment-friendly way to keep diabetes patients living healthy and meaningful lives while also taking care of the planet they’re living on.

The post Glucose monitor and insulin pump concept is a sustainable way to keep tabs on diabetes first appeared on Yanko Design.

A lot of people like me leave the house early in the morning and return late at night just to rest and sleep. I rarely have time and energy to actually clean the house thoroughly. But of course you need to make time to get rid of dust or else your health and your peace of mind will be affected. Robot vacuums are the best friends of those who need a bit of clean up without exerting much energy and we’re seeing a lot of options and concepts for this kind of cleaning tool.

Designer: Raye

Hestia is a concept for one such tool, named after the Greek goddess of the hearth and the home because it protects your home from germs and dust. It is basically a robot vacuum cleaner but it uses AI technology to make the cleaning process easier and more convenient. The AI, together with the ultrasonic sensors located on both sides, helps the cleaner set a path to clean your home and also avoid obstacles (probably as long as you don’t leave random things lying around your floor). It has two rear wheels that can give it a good “kick” while the front wheels lets it go forward and sideways.

The vacuum itself looks like a small, flat robot with a small head on top. It has an external display that shows off the “emotion” of the robot with its camera and lidor sensor while the Demeter CPU enables the smart space cleaning feature. The default face is its normal, tranquil mode while the cleaning mode shows off an angry face because of the dirt and dust she needs to clean. When the battery is low, it shows off a weak face. The monitor also displays the battery level and the cleaning process.

The Hestia robot vacuum cleaner uses anodized aluminum and polycarbonate material so you get a more “sophisticated” but clean and minimalist look. The charging station which looks like the robot’s mother ship is able to empty the dustbin so you can just gather all the dirt and dust inside it for disposal later on. It seems like something that will greatly benefit people like me who are too busy (or sometimes lazy) to do regular cleaning.

The post AI-powered robot vacuum concept brings both brains and heart to your cleaning chores first appeared on Yanko Design.

Inspiration can strike when you least expect it, but there are often places and events that can help get the creative juices flowing. The chatter of a lightly crowded cafe, the pause after attending a convention, or even simply moving from your desk to the couch can sometimes make you want to reach out for a sketchbook or even a digital canvas. The latter is fine if you have a tablet like an iPad, but if you prefer doing your designs on a computer, you’re a bit out of luck. Designers and artists these days need a certain degree of freedom and mobility, and Wacom is attempting to fill that need with a new product that isn’t just a screen you can draw on but also a beautiful computer monitor you can take anywhere you go.

Designer: Wacom

Wacom is like the Apple of the digital creative world, making products that let artists, designers, and engineers bring their ideas to life. Its Cintiq brand, in particular, has been the household name for years when it came to “pen displays” or screens you can draw on with a stylus. These have traditionally been as large as computer monitors, though there are now smaller options within the 13 to 16-inch range. While you can definitely shove the smallest Wacom Cintiq or One 12 inside a bag, their designs clearly shout that they’re really meant to be drawing tools more than anything else.

Wacom Movink’s biggest change might be technical, but it’s a technology that is allowing the brand to move in a slightly different direction from the rest of its pen displays. In a nutshell, it is Wacom’s first-ever OLED pen display, immediately setting itself apart from the LCDs of the rest of its portfolio. This gives it the advantage of being able to display richer and deeper blacks as well as a wider range of colors, which will help designs pop out better and be more color-accurate.

This OLED technology, however, also brings the advantage of making the Movink the thinnest and lightest of Wacom’s pen displays. It also has a sleeker design that looks more in line with portable monitors in the market today. Given that it does perform exactly like a portable OLED touch display, that’s not an inaccurate assessment. It still has thick bezels, but not as wide and egregious as on the Cintiq line. There’s also no rubber “bumper” around the edges, resulting in a simpler and more minimalist appearance.

Aside from the display upgrade, the Wacom Movink is functionally on par with the company’s other products. Where it really shines, however, is the newer and more modern design that makes it not only more portable but also more presentable. It’s not only a design tool made for designers but also one that designers will be proud to pull out of their bag and show off in public, empowering them to work on the go, whenever and wherever their muse calls.

The post Wacom Movink pen display ventures into the world of portable OLED monitors first appeared on Yanko Design.

With almost everyone owning a smartphone these days, the need for dedicated media players has plummeted significantly. That’s not to say they’ve completely disappeared, especially those types that can be placed and displayed on desks or shelves. The retro design craze has breathed new life into old products like turntables, but these aren’t the only designs from bygone ages that deserve to be rediscovered. Some of these old-school designs come from the digital realm, where some software have achieved near immortality thanks to their distinctive user interfaces. Winamp is one of those iconic faces when it comes to music player applications, and this concept turns that into an actual device that, just like the digital original, can somewhat be configured to suit your needs and moods.

Designer: Eslam Mhd

By modern standards, the original design of the Winamp media player app is clearly outdated, but it remained a darling until recently because of its flexibility. It supported using different skins to personalize the software’s appearance, which naturally led to hundreds of designs, some of which might even make you want to gouge out your eyes. At the very least, Winamp followed a LEGO-like design where you can move parts of the app around or even remove them completely, depending on your needs.

This concept design for a device of the same name follows the latter aspect of Winamp’s design, particularly the ability to move its three main panels around or even leave one out. Like the original Winamp, the media player device has a component for the actual media controls with a single-line display for the current music, one for the equalizer, and another for displaying album art and the playlist. All three can be stacked together for a tall device that is propped up on a desk using the built-in kickstand of the equalizer. Or you can switch them around leaving only two components visible, as long as the equalizer is there to act as the base.

You can, for example, only have the media controls and the equalizer if you don’t mind not seeing the list of tracks and the album art. Or if you already have a fixed equalizer setting, you can put either the media player or the album display above it and then snap the other component in front of the equalizer to hide it. You can even show only the media player itself, with the other two hiding behind it. These components connect using strong magnets, so no rewiring is needed to make instant changes to the combination. And at the end of the day or if you want to take the device with you, you can simply collapse all the components in a sandwich and carry it around.

What’s interesting about this particular design is that it uses physical controls like sliders and buttons instead of simply employing a touch screen to offer the same interface. It’s like reverse skeuomorphism, where the digital user interface mimics the appearance and behavior of physical controls. Of course, this more physical design means you don’t get to use skins anymore, but it’s a small price to pay for such an intriguing device.

The post Modular media player concept brings iconic Winamp design to the physical world first appeared on Yanko Design.

Clock designs come in all shapes, sizes, and levels of complexity. On one end, you have ultra-minimalist analog clocks that barely have discernible hands or numbers on their faces. On the opposite end, however, you have not only sophisticated mechanical clocks with all their gears and movements, you also have digital clocks with smart features that go beyond telling the time. Of course, it’s always a matter of balancing functionality and features, and some designs intentionally tip the scales toward one or the other depending on their target audience. This DIY wall clock, for example, caters to those who want a more vibrant and creative way to display the time, though it does require a bit of technical and electronics know-how to make.

Designer: Dawid Karoński

It’s really impressive how far DIY tools have come these days, from desktop 3D printers to small circuit boards that can run complicated programs to control nontrivial devices. And depending on the skills of the one making them, the end result could even look like a professionally made product that came from a factory rather than someone’s garage or home workshop. The Hexaclock, named for its unusual shape for a clock, is one such example, offering a wall clock and smart lamp that can rival the quality and features of well-known smart lighting brands.

The catch is that you have to make one yourself, which may or may not result in a product of equal quality. You’ll need a 3D printer, unsurprisingly, but that is actually the easier part of the process. The more tedious phase requires precisely cutting an LED light strip into specific sizes so that the LEDs actually line up with the hexagon-shaped compartments of the lamp. Even more laborious is connecting these segments together again into a single unit, at least electronically, so that you can control the strip with a program as if it was never cut at all.

All of these details, from the schematics to the software, are made available for free so that anyone with the right tools and knowledge can make their own hive-shaped wall clock. In terms of functionality, the clock offers plenty of customization options, from animated color transitions to dancing patterns. What’s even more impressive is that it supports a light sensor that can dim all LEDs except the ones displaying the clock itself so that the bright lights won’t disturb your sleep at night.

The post Hive-like LED wall clock offers a colorful and dynamic way to tell the time first appeared on Yanko Design.

Nostalgia is a powerful emotion, as proven by the number of successful crowdfunded projects and launched products that try to capitalize on this ongoing retro trend, especially in the gaming industry. Vintage designs of the past are today’s quirky oddities, and there are many who are quick to jump on the bandwagon. While many of these retro designs try to also recreate the experience of holding a real gaming console or turntable with some modern features and conveniences, others are just content to copy the aesthetics of old-school products and leave it at that. This MagSafe iPhone charger might be in that latter category, and while it is charming in the way it brings back fun, playful memories, it could have probably gone further if it really wanted to.

Designer: Elago

To be fair, the Elago WS M5 Charging Stand does exactly what it says it does, which is to offer a fun MagSafe charger in the design of the Nintendo Game Boy Advance SP. In that regard, it does its job well, providing a stable and useful stand for charging the phone. The fixed 30-degree angle, for example, is claimed to be perfect for watching videos or using iOS Standby Mode at night. It even has helpful support on its back to prevent the charger from tipping backward from the weight of the phone.

Elago never claimed that the stand was a functional gaming device, despite all visual indicators. It’s simply meant to inspire a trip down memory lane and nothing more. The buttons do nothing and you can’t fold the charger close like the original handheld it was based on. For a $25 MagSafe charging stand, that’s a bit disappointing. It sort of raises expectations and then dashes them quickly, making those good old days really feel more like a distant memory.

It’s also a missed opportunity for innovation and distinction. Sure, it won’t make much sense to turn it into a makeshift game controller, but having the buttons trigger some action on the phone or do anything at all is significantly better than making you feel like an idiot for expecting that a button press would actually result in something. A clamshell design would have also made this charging stand a bit more portable while relying on a kickstand mechanism to provide that same stability and support.

What this Game Boy-like MagSafe charger really accomplishes is to demonstrate the biggest benefit of this magnetic wireless charging technology. Sure, charging without cables is convenient, but its speed still leaves a lot to be desired. Instead, it’s the freedom to design a wider variety of accessories, from chargers to stands to docks, that MagSafe really shines, and this Elago WS M5, underwhelming as it might be, is just the tip of the iceberg of what’s possible.

The post Elago Game Boy style MagSafe iPhone charger looks fun but comes up short first appeared on Yanko Design.